Kilns For Sale
EARLY SUMMER SPECIALS - for orders placed through July 31, 2016
HB86E: 3 key $495
HB89E: 3 key/12 key $565/$600
Doll Kiln: 3 key/12 key $605/$640
129E: 3 key/12 key $695/$730
MAS1818HE: 12 key $960
MAS1823HE: 12 key $1050
MAS2323HE: 12 key $1430
MAS2327HE: 12 key $1625
MAS2823HE: 12 key $1810
MAS2827HE: 12 key $1930
All the MAS kilns above come with free furniture: 1 full shelf, 2 half shelves, & 6 ea. of 4, 6, & 8" posts.
Cube 20E: 12 key (20" square inside and 20" deep} $1750
Cube 25E: 12 key (25" square inside and 25" deep) $1915
1827G: burners & ignition $1085
2327G: burners & ignition $1390
2827G: burners & ignition $1865
FL10E: 12 key $4455
FL12E: 12 key $4735
FL17E: 12 key $5725
Square 146GFE: 12 key $685
Square 186GFE: 12 key $770
Square 149GFE: 12 key $675
Square 189GFE: 12 key $810
Square 1414GFE: 12 key $1005
Square 1414GFETLC: 12 key $1130
Square 1814GFE:12 key $1195
Square 1814GFETLC:12 key $1315
GF214E: 12 key $1470
GF214ETLC: 12 key $1590
GF3E: 12 key $1430
GF3ETLC: 12 key $1550
GF314E: 12 key $1675
GF314ETLC: 12 key $1795
FACTORY SECONDS @ 35% less than retail - 1 year warranty
1414FLE: 12 key $935
1414E: 3 key/12 key $720/$755
1414HE: 3 key/12 key $830/$865
1823E: 12 key $1125
1827HE: 12 key $1275
2323HE: 3 key, cntrwt. lid $1590
MAS2323HE: 12 key $1380
MAS2327HE: 12 key $1565
2327HE: 12 key, cntrwt. lid $1775
2018E: 12 key $1655 cntrwt. lid
2527E: 12 key $2340 cntrwt. lid
DM2523HE: 12 key $2400
126 Lite: 12 key $520
Quatro 16: 12 key $830
Quatro 16GFECS: 12 key $915
Square 186GFE: 12 key $1005
Square 186GFETLC: 12 key $1165
3014GFE: 12 key $2065 cntrwt. lid
USED KILNS (refurb. incl.) @ 40% less than retail - 1 yr. warranty
1214E Raku: 3 key $895
2323E: 12key, no cntrwt $1195
2327:HT, no cntrwt. lid , 208 volt, 1 phase, sitter/timer $1465
2823HE: 12 key, no cntrwt . lid $1600
2827E: 12 key, no cntrwt. lid, $1700
3018HE: 12 key, no cntrwt. lid. $2005
3027HE: 12 key, cntrwt. lid $2715
3031HE: 12 key, no cntrwt. lid $2770
ChampXL: 12 key $565
Square 146GFE: 12 key $610
189GFE: 12 key: $720
GF314ETLC: 12 key, cntrwt. lid, quartz rods in fiber lid $1605
NEW KILNS CAN BE ORDERED AT A 30% discount for studio size and 22.5% discount for commercial size. Same applies to shelving and options.
Susan Schumpert, Olympic Kilns Distributor
#426 - Jun. 18, '16
For sale: 2,000 insulating fire brick in good condition (but used) for $1.00 each. Don't know if they are K-23 or K-26 but assume they are K-23. Would like to sell them as one lot but will consider lots of 500 to 1000. Buyer(s) need to act quickly as they will not likely be available after a month passes. They are in boxes and in good condition. Includes some arch brick.
E-mail if interested.
hollywadams (at) gmail (dot) com
#425 - Jun. 16, '16
Olympic 23 Raku kiln, very good condition.
Kiln lifts by turning a hand winch which is attached to an overhead frame. This allows easy access while trapping the heat in the kiln and away from the operator.
Fires to Cone 10. Has 3 burners.
Gbankov (at) aol (dot) com
#424 - Jun. 13, '16
An L&L JD-2927 electric kiln with Dyna-trol controller. This kiln has been cut down to only 2 rings, so the firing area is 28" across but only 18" high.
240v, 80amp. New relays, new wiring in controller.
Includes 6 1-inch half-decagonal shelves.
Email or text
thatpotteryguy (at) gmail (dot) com
#423 - Jun. 8, '16
Randy Brodnax fiber lined expanded metal and angle iron kiln for sale near Moscow, Idaho. Includes vent hood and insulated chimney. $3,000. Only fired once to check gas hook up. E-mail for particulars. Must pick up.
#422 - Jun. 7, '16
Selling gently used cat arch wood kiln. Based on Peg Udals kiln that Ruggles designed for her.
I added exterior fire box. Height of arch, inside, is 51". Floor is 44x39". 226 high duty #1 arch brick, #2 and 18 #3's.
1450 med duty straights
Plenty of soft brick for door too. 12x24 shelves.
Must dismantle and haul.
Eastern panhandle of WV
robinteas (at) gmail (dot) com
#421 - May. 31, '16
Selling our used AMACO tabletop kiln for $400. Its excellent for metal enameling, gaze testing, and decorating.
- pull-down door with peephole which is easy to open and close
- 120V, 20 amp power cord included
- Serial number: FC646
- Model number: 62EFC
dimensions are: 18''deep, 14.5"long, and 17.25"high
firing chamber capacity: 7 3/4"deep, 7 1/8"long, and 4 3/4"high
#419 - May. 19, '16
Korean style wood kiln
This wood fired cross draft down draft kiln is approximately 100 cubic feet in size. This design is modeled after a 120 year old kiln that fires extremely well by both fire box and side stoking. Included are 25 silicon carbide shelves and 10 corderite shelves. Also included is the metal roof and frame. The kiln is covered by an adobe clay covering that adds to the insulating value of the kiln during firing. This design has fired each time within 1/2 cone difference between top and bottom to cone 10. insulating value of the kiln during firing. You move.
Pictures and more at www.clayequipment.com
#418 - May. 15, '16
Amaco EX-399SF Kiln for sale. $2,725 OBO. Never been fired and includes ventilation unit.
#417 - May. 11, '16
Large Paragon Kiln Model # LT-3 along with pouring table and 100-150 molds. Bargain Priced at $ 5,000.00 as I have over $ 30,000.00 invested. No shipping - Must be picked up.
#416 - May. 10, '16
For sale is an L&L Kiln Model e28S-3-eu Easy-Fire Automatic Kiln with with Multi-Program Two-Zoned DynaTrol mounted in an easy-open piggy-back control panel, with hard ceramic element holders, thermocouple protection tubes, strong solid-top stand, easy-lift spring hinge, 28" diameter by 18" high 6.8 cubic feet - 193 Liters). 3" K23 brick. European version with Positive Door Interlock Switch, lid vents. Direct power connection. Cone 10. 1290 Deg C.
follow link for more information: http://www.hotkilns.com/e28s-3-eu
Comes with he large size Vent-Sure Downdraft Kiln Vent System.
Bought kiln for $3500.00 after taxes, asking $2000.00.
The Kiln is in excellent condition. No scratches or brakes.
Fired only 5 times since I bought it.
Will not deliver. Buyer needs to figure out a way to ship.
Email for more info or pictures.
Northern New Jersey
#415 - May. 9, '16
I am selling an L&L Doll Kiln. The kiln has been fired a total of 13 times (I have all records of firings). Kiln comes with a fan exhaust system, complete manual, 2 full and one half shelf, various sizes of pillars and stands, kiln wash, 5 clay batches, 10 glaze colors, and one bottle of wax resist. Everything you need to start making your own pottery.
I am leaving the country and I cannot use the kiln overseas.
Price is $1000 for full set OBO.
Local pickup only. Photos available by request.
#414 - May. 1, '16
Olympic Kiln w/Accessories For Sale: $300.00
20 Cubic Foot Capacity, C-20 Electric Kiln, Single Phase Power, Top Loading w/Spring Assisted Lid, built in Electronic Controls, Kiln Shelves, Posts, Vent Port, Mobile Shelf Cart, Wiring, Shut Off Switch, 80 Amp Circuit Breaker and 2 Extra Replacement Kiln Elements.
Outside Dimentions: 58" W, 61" D, 44" H; Inside 28"x28"x36".
Weight of Kiln 700 LBS, Loading Dock Access for Pick Up
Located at Christian Ridge Pottery, 210 Stock Farm Road, South Paris, ME
South Paris, ME
#412 - Apr. 30, '16
SKUTT AUTOMATIC KILN - MODEL# KM-1018 $950.00
Gently used Skutt ceramics/pottery kiln for sale. This kiln, since new, was stored in my Step-Fathers indoor studio in Tennessee. It is now located inside my place of business and has been properly handled and stored.. Although it was purchased years ago, it has only been used a handful of times. This 240 volt unit is in perfect working condition and is 100% complete with some accessories (Everything pictured is included).
Please consider the location and understand this is being offered as LOCAL PICK-UP ONLY in the Dallas/Fort Worth area. If you wish to have this kiln shipped, you must arrange pick-up, crating and shipping yourself. Serious inquiries only, and please have green cash.
Durable construction and long-lasting reliability makes Skutt a favorite choice of potters. The 1018 features high quality Kanthal A-1 elements and reversible, long-life slabs. A spring-loaded Lid Lifter allows you to easily open the kiln with just two fingers. The 1018 is a low, wide, easy-loading kiln. Fires to a maximum cone 10, 2350° F. Single phase. Traditional Dawson KilnSitter and timer controls temperature. The 10-sided kiln's exterior measures 29" in diameter. 2-1/2" firebrick walls and a 4.6 cubic foot chamber (23-3/8" diameter x 18" high) capacity.
Please email for response w/i 24 hours.
dacreativedallas (at) yahoo (dot) com
#411 - Apr. 19, '16
CERAMIC KILN & ACCESSORIES
Wife passed away. Have Paragon ceramic kiln and accessories for sale. Full size. Model #A88B, 22.5"x22.5", 20.5" height base, collar 6.5" height. Slip-o-matic pour table 20"x32.5"x67". Have many molds as well as many other accessories. Ready for immediate sale. Please call if you are interested.
#409 - Apr. 7, '16
Like-new, unused Olympic Propane Pottery Kiln.
This kiln isn't brand new, per se, because it's about three years old. But, it's never been used or even attached to a propane tank.
I was given this kiln as a gift several years ago, but I've never used it as I am just a hobby thrower and don't produce enough to fill an entire kiln. Now that it's warmer outside, I'm clearing out my garage and this kiln takes up a good amount of unused space.
Max degree: 2,350 F
Gas Type: Liquid Propane
Orifice size: 40
Asking for $2,000 or best offer. Buyer provides either pickup or shipment.
Email for further questions or negotiation.
#407 - Mar. 16, '16
Newly reconditioned Paragon High Fire Kiln Model A-28B-3 for sale. It has new heating elements, Kiln Sitter Model LT-3 and several new Bricks. Its been test fired once since being reconditioned. The kiln has been in dry storage of several years. I am asking 450.00 cash or Money order. The buyer will need to provide pickup or shipment.
For sale by Rodney Thomson.
Pickup location will be provided upon inspection and sale.
North Austin, Texas
#406 - Mar. 14, '16
Paragon hi fire kiln for sale - Model A-24B for ceramic and pottery
$350 OBO - need to move out of storage.
Control: Kiln Sitter Model P
Specifications per Paragon Website:
Max Temp: 2350 F
Kiln Type: Top Loading, Round
Chamber Volume: 7.52 CU.FT.
Chamber Width: 23.5 IN
Chamber Depth: 29 IN
Outer Size: 30.5 IN Width x 39.5 IN Depth x 36 IN Height
Battle Creek, MI
withstyle (at) comcast (dot) net
#394 - Jan. 22, '16
Bailey Gas Kiln for Sale
Plumbed for natural gas. Very clean.
Includes all furniture, stilts, shelves and cones. 3 sections of Stainless steel lined chimney with mantle and cap. Factory manual for installation and firing guide.
$4500.00 Pick up in Easton PA
dinglepottery (at) gmail (dot) com
#403 - Jan. 12, '16
This is a manual down draft kiln with burners firing from the bottom and it is approximately 104 cubic feet in size. This kiln, which uses propane, was built by Kyung In Ceramics, a Korean company. This kiln has a solid steel exterior and brick interior. Chamber volume is approximately 16 cubic feet. The kiln have only been fired twice so it is in great condition.
What is exceptionally great about this kiln is the design of the chamber and the door. This chamber maintains the heat with great consistency, due to the down draft and the burners firing from the bottom, as previously mentioned. Furthermore, the round ceiling of the chamber allows the heat to flow upwards, then back down in a circular motion consistently. The hinge of the door is made out of solid steel so it is very sturdy. Also, there are four valve shaped bolts to lock the door to the chamber. Lastly, I would like to mention that at the back of the kiln is a long chimney, made out of solid steel.
I'm asking for 3,350 for anyone who is able to pick up in Abbotsford, BC.
Please, feel free to email me at email@example.com for more information (pictures, etc). Thank you for your time and have a great day!
p.s. used electric spinning wheel and shelves included
lukekim92 (at) gmail (dot) com
#402 - Jan. 10, '16
Korean style Wood Kiln
This wood fired cross draft down draft kiln is approximately 100 cubit feet in size. This design is modeled after a 120 year old kiln that fires extremely well by both fire box and side stoking. Included are 30 silicon carbide shelves and 12 corderite shelves. Also included is the metal roof and frame. The kiln is covered by an adobe clay covering that adds to the insulating value of the kiln during firing. This kiln fires with no more than 1/2 cone difference between top and bottom. You dismantle and move. $2500 complete
Pictures can be seen at www.pottery-studio-equipment(dot)com.
#400 - Nov. 5, '15
For Sale: Bailey Gas Reduction Kiln - $7500
Bailey Standard Studio Gas kiln 18/12 (12 cu ft. of loadable space). Set up for propane gas. Includes 8 Advancer shelves (10 loadable shelves), high limit controller, air manifold system, stainless steel combustion hood and oxygen sensor installed. Only 7 years old, fired 29 times. Excellent condition.
I will arrange transport to your location in Maine. You will need to arrange unloading and placement in your building.
#391 - Aug. 29, '15
ONLINE AUCTION. ENDS 8/11/15. FOR DETAILS VISIT WWW.GOVDEALS.COM AND ENTER 3821-104 IN THE QAL (QUICK ASSET LOOKUP) BOX ON THE HOMEPAGE.
You are bidding on a T2336-D DaVinci Rect Kiln w/ a Vent Sure Downdraft Kiln Vent System. These items have never been used but are several years old. The items are still in the crates they were originally shipped in and have never been unpacked. Item is 208 V and a 3 Phase electrical system.
The shipping weight for both the Kiln and the Furniture Kit is 1705 lbs
Please ask any and all questions before bidding. We will do our best to answer them but please keep in mind that we are not experts on these items.
#389 - Aug. 6, '15
Skutt kiln Model 1027. 3in. brick. 240V. Bought in 1999. Still in good condition.
Sold with kiln furniture, mittens, and cones.
#387 - Jul. 11, '15
48 cubic ft downdraft natural/propane cone 10 arch kiln with brick up door located in Buena Vista, Co. Top 2/3 insulated firebricks, bottom third hard firebricks. Burners and gas piping included with stilts and shelves to fill entire kiln. Angle iron frame. Arch forms included. Exterior dimensions 64" x 64" x 68" plus 18" x 23" flue off back with 10' metal flue and cap extension. Interior 45" x 45" x 47". Includes 1,000+ lbs of clay. Delivery available in Colorado. Excellent condition, $4,000 OBO. Also Northstar slab roller table for sale, excellent condition, $650 OBO. Contact Bob for pictures or info or reply with a valid phone number.
#386 - Jul. 5, '15
Used 60 cubic foot Sprung-Arch Downdraft Propane Fired Kiln For Sale. $4000. Includes all NEW-IN-THE-BOX K-23 3" straights and arch bricks to replace old soft brick in kiln. Includes all the old soft brick, a hard-brick floor and hard-brick deflecting bricks, two Venturi burners with gauges, angle iron, damper, heat shield--everything you need to rebuild the kiln, except the propane. You must disassemble and remove. Photos available upon request. I do not have the arch-form. Call or email.
#385 - Jun. 26, '15
I have the following one, maybe two kilns available.
Selling a large custom built fiber lined down draft car kiln. About 60 cubic feet. Has forced air burners built from Ward burner parts, CFM 135, about 650,000 BTU/hr and fires to Cone 10. Needs a chimney and some updates to the fiber lining. Kiln furniture not included. Must be moved by end of June. Asking $500 obo. Buyer responsible for moving. Burners may be available individually. Please email for more information.
Smaller kiln about 38 cubic feet, also fiber lined, may also be available.
#382 - Jun. 6, '15
Shuttle kiln by Forni. Pulsar model. 952,000btu. 2100 degree. 89"h x 152"d x 83.5"w. Beautiful cond. $70k new. Must move it now. Building being torn down. Sacrificing for $7000 obo. Pictures available.
#380 - May. 6, '15
I have enough brand new K24 soft-bricks to build a 60-cubic-feet car kiln. This includes 1350 straights and 150 number one arch brick. There's also hard brick straights, splits, and soaps to go around burner ports and spy holes. These are in sealed boxes (never been opened) and stored inside on palettes. Got these new in 2008 at wholesale price.
Will sell for less.
#379 - Mar. 19, '15
36 cubic foot portable downdraft gas kiln, with double brick walls, electronic flame safety system, push button automatic spark ignition, manual control valve, 0-15 water column pressure gauge, DD-1 digital solid state electronic controller, 8 natural draft high velocity ceramic burners with a maximum total of 449,000 BTU/Hr. , with individual fuel and air control. Misc. shelves and post included. Call Hal for more info.
Also available are electric kilns, ware carts, tools, spray guns, and many other ceramic related items.
#377 - Mar. 11, '15
FOR SALE- 2 Ward B4 Venturis burners with BASO safety system and Ransome piggyback pilots. Never used- I bought them for a LP kiln I was putting in the backyard, and switched to wood at the last minute (long story).
For info on the burners, follow this link: http://www.wardburner.com/burnersparts/venturiburners.html
In general, these burners can get up to 400,000 BTU with 20psi of LP pressure (the piggyback pilots and burners are high-pressure rated). I bought them for a 35 cu. ft. kiln, and the the guys at Ward told me I should be able to get up to temp no problem (I fire cone 6- approx. 2200F).
$1100, shipping included.
#374 - Feb. 23, '15
KILN FOR SALE
L&L Davinci Production Electric Kiln
In very good shape accept for the lid. Kiln has 6 sections. 3 of them have never been used.
This kiln has a unique ability to fire either manually or automatically. No kiln manufacturer does this now, as far as we know. Stacking space is three 14 by 28 inch shelves. Using 3 sections stacks to 24 inches high or all 6 sections 4 feet high. Total stacking space is 28 inches deep 42 inches wide 48 inches high.
Powered bottom (elements need to be replaced but can be fired without it). Super Dyna glow element holders. According to manufacturer retail price for this kiln is $12000. This kiln with the shelves ( Shelves in perfect condition)
Has been valued at $6000. The kiln is currently a triple phase but can be easily converted to single phase. Asking $5000. Please call or email with any questions. Do not send any attachments.
karen (at) karendonleavy (dot) com
#367 - Nov. 19, '14
Luke Washborn high fire electric kiln for sale
Old but in good working condition.
Cone 10 1/2
18x18x18 with extra coils, lots of furniture.
$700 - you remove
Sag Harbor, NY
golfermugs (at) optonline (dot) net
#365 - Oct. 31, '14
Cress Kiln for Sale $500.00 obo
Cress Kiln High Fire Auto Set, clean like new
240 v-AC 16amps
Some extra attachments included
Lots of doll molds as well
Call or text for more info
Port Huron, MI
#364 - Oct. 24, '14
skutt 12/27 single phase, 240 volt three switches(low-medium-high) high fire in good working condition 800.00.
#363 - Oct. 21, '14
For sale. Skutt KM 1027 great shape with shelves and assorted furniture owner's user manual ready to go. Contact David. Asking $1500.
St George, UT
#362 - Oct. 13, '14
2013 custom refrigerator style Olympic kiln
OUTER DIM: wdth75" x dpth62" x ht70"
INNER DIM: wdth53" x dpth36" x ht41"(45 cubic ft)
MAX TEMP: 2350 (cone 10)
240V 3 phase 80 amps 60Hz
COMES WITH: 40 custom fit corelite shelves, Euro venting system
Like new condition
#358 - Sep. 25, '14
Gas Kiln, 40 cu.ft. Arch kiln. Package includes everything you need to build the kiln. Hard brick, soft brick, arch brick, chimney, iron frame, pyrometer, Johnson dual burners, blower, kiln building book. All dismantled and in my garage.
Email or call and leave a message.
#353 - Aug. 15, '14
Front loading - Paragon Dragon 24. www.paragonweb.com
9 cubit ft interior 24w x 24d x 27h
Type S thermocouple
Sentry 2.0 controller
240V, Ph 1, H2 60, 70 Amps, 16800 Watts
Adhered to stand, on rollers that lock, easily moved w/handles
Kiln furniture included
Purchased in Sept 06. Rebuilt 90% interior firebrick/elements Sept 11
Good condition. Could use element work or replacement on door.
Selling for $1700 or best offer.
For pick up only. Must have lift gate for loading.
Need to MOVE soon! Please email inquiries for additional information, pictures, etc.
Mt. Washington, KY
#352 - Aug. 7, '14
Kiln for Sale
Skutt KM1627-3PK Kiln 208v (I have the elements needed to convert to 240v)
Brand new/Never been used
Will sell for $4700.00
Will consider delivering it for the cost of gas or you pick up
#346 - Jul. 6, '14
For Sale West Coast Gas Kiln
This kiln was made in the 1990's and has not been fired for 15 years, always kept inside the studio.
Dimensions: 75 " tall 41.5 deep and 64" wide around 12 cubic feet in very good shape.
Currently set up for natural gas with six burners. Comes with hood vent and shelves.
New owner must pickup and we can help with loading.
3000.00 or best offer.
#344 - May. 27, '14
Used Paragon High Fire kiln with Sitter Model P controller. 120/240. Approx. 5 cu ft. Will transport up to 200 miles or ship to you at your cost. Asking $400 obo. Photos available.
#343 - May. 27, '14
Soft brick sprung arch Car Kiln for sale 24" x 34" x 44" stacking space IFB and steel construction
2 Ransome B-5 burners with piggyback pilot & Baso safety installed
Will require dismantling
Minimum bid: $750.00
Being sold at sealed bid in online auction
Used Ceramic Fiber Raku Kiln
46"h x 18"w
Fiber and IFB construction
l Pyrometer and analog meter
1 Gaco MR 750 burner
misc. shelving components
Minimum bid: $50.00
Being sold at sealed bid in online auction
For details contact Terry Gess
Clyde, NC (near Asheville)
#340 - May. 2, '14
I have a kiln for sale that was originally constructed by Leonard Keith of North Carolina.
2600 deg, IFB hot face
1900 deg IFB cold face
27 wide x 27 deep x 40 ½ high
Comes with 4 ea. 12 x 24 x 5/16 silicon
12 ea. 9 post
2 ea, Ward 10 burners (Propane or natural)
1 ea balanced manifold w/clean out
3 ea 0-30 psi gauges
3 ea gas pet-cocks
Flue and 8 chimney
Asking price: $3500
#337 - Mar. 27, '14
Paragon SnF23-3 Semi-automatic Kiln with Kiln sitter and limit timer, 3 brick 240V single phase with furniture kit for sale. Used 4 times. $2,100.00
#336 - Mar. 9, '14
Skutt Model KM1027 - Automatic -- Never been used
Nice size chamber -- 27" deep and 23.38" opening resulting in 7 cubic feet of firing space. Maximum firing cone is 10 and temperature is 2350. **Please note: this kiln is 208 Volts, Phase 3 - therefore it is configured for a school or industrial district, but the kiln can be converted to 240 Volts, Single Phase - residential use.
Does not include furniture kit.
Average list price is appx $2,800, with average sales price of $2,100
Our asking price is $1,400
Local pickup only
Metro Atlanta, GA
#334 - Dec. 27, '13
I have a brand new (three weeks out of the manufacturer) never used cone 10 small kiln with furniture kit for sale. It's still in the original shrink wrap it shipped with. 240V, single phase. It is currently at zip code 22901 in Virginia. It only weighs about 150lbs so is easily moved with a SUV/truck. I'm willing to drive 60 miles to meet someone partway. Here's a link from where I purchased it:
$1,050 (savings over $300 from retail with accessories and shipping).
I have five packages of 1mm keraflex tape/paper porcelain. Each package has five A3 (16x20") sized sheets. These were still in their original shipping box from Australia until I just checked them now to make sure they looked okay and were all there.
$75 package + actual shipping cost (savings over $40/package).
#331 - Oct. 16, '13
DaVinci T3445 5 ring electric kiln for sale. I am shifting to a new studio and have to switch to gas, so have to sell this kiln I have been waiting to hook up for years! I fired two rings of this kiln to cone 5 about 5 times.
Lid has been modified for a two ring set up, and can be switched back up to the five ring lid lift.
This is the older model of this kiln which today sells for 10K. Looking for $5500.
#330 - Oct. 15, '13
L and L kilns
easy load kiln
serial # 051705F
max temp 2350 F
The Easy-Load front loading kilns are designed for easy loading and even heating in a heavy-duty construction. They feature 3" of firebrick backed up with 2" of mineral wool, Cone 10 operation, DynaTrol program control with three-zone control, ceramic element holders, elements on the door, back and sides, full arched roof construction with extra-strong K25 brick, beefy hinge system, door switch, plug door, gasketed door, integrated stand, optional Orton kiln sitter back-up and a complete selection of sizes up to 25 cubic feet.
Inside Dim (Inches)
EL2436 12 25" Wide x 26" Deep x 36" High
10 years old but never used. Still on original pallet and in packing.
Some goodies for stacking inside are with it.
Fort Worth, TX
#329 - Oct. 7, '13
L & L Electric Kiln
Model # JD230-3-EZ-PB
Jupiter Automatic Kiln with Multi-Program Zoned DynaTrol, 3" of brick, heavy-duty series elements, stainless steel spring hinge, modular construction. Extra power with E23T elements.
Has powered bottom for more even heating.....was an add on.
Pulls 56amps on 240volt/1 phase power. (Retails for $3,515.00)
Price includes: Kiln Furniture, Kiln Vent plus vent doubler for adding a
second kiln. (Retails for $1,020.00)
Fires up to cone 10....Fired only 4 times.
Buyer must be able to remove item themselves......it was professionally installed and I would have no idea how to remove.
Asking $3,000.00 ....like new
Cash, Money Order or Cashier's check only
#326 - Oct. 6, '13
Skutt Kilnmaster 1027 One-Phase Digital Kiln w/ Orton Ventmaster & Extras
Barely used, near perfect condition.
Skutt KM 1027 Single Phase Digital Kiln w/ Extra accessories
- Safety Lid Lifter
- Orton Ventmaster
- 1 full kiln shelf
- 7 half kiln shelves
- 4 x 3" posts
- 4x 1" posts
- Skutt Original Equipment Manufacturer Manual
- Orton Ventmaster OEM Manual
This kiln is ready to go! It has been removed from a former studio and is completely mobile. Quick and easy to transport.
Everything is included in this price. Original pricing for all components would amount to over $3,500.
- Skutt KM1027 - $2,850 - (Manufacturer's price list)
- Skutt kiln shelves - full - $63, half - $37 ea - (Manufacturer's price list)
- Orton Ventmaster - $470 (Manufacturer's price list
Kiln shelves and posts are also included for FREE! The kiln has been used recently with no known issues whatsoever. Get a great kiln with tons of accessories, ready to be picked up and brought to your own studio, for a fraction of the price. Pick up just about any time. Email to set up a meeting.
Bluebird pug mill 440, de-airing with Speedaire vacuum pump. Photos available.
KILN OR PUG MILL EACH $1800.
Super deal for both! Prices flexible.
#324 - Sep. 26, '13
I am selling a cone 10 Axner super kiln manufactured by OLYMPIC KILN for Axner Pottery Supply. Purchased in 2002 my kiln is in good condition, I need to downsize. Asking $800.
Max temp. 2350
240 volt/ 66 amp
3 inch brick
Chamber dimensions 28x31
Dawson kiln sitter
Bartlett Controller V6-CF
6 shelf half rounds
6 half inch kiln posts
6 8 inch kiln posts
6 10 inch kiln posts
Brand new thermocouple
Would be happy to send photos or answer any questions.
Palm Harbor, FL
#322 - Aug. 18, '13
Skutt Kiln Model 231/240 Used (Bear DE) $450
Used Large (good condition) Skutt 24 1/2`` X 26`` interior with extra 4 1/2`` ring. Kiln has timer and environment fan on the bottom. Shelves, stilts and cMax fire 2300. CASH ONLY Local pick up only. We also have extra Kiln parts available. Local Pick up only.
Also Lilypond motorized pouring table with pump and mixer. 6'L X 2' 2"W X 31"H $450.00
Delaware City, DE
#320 - Jul. 30, '13
A 240 volt,95 amp, single phase, 17 cubic foot L&L JD2945 kiln with automatic dynatrol controller, five rings. this kiln is 10 years old and only low fired a few times. Price is firm at $2400, shelves and posts included. local delivery possible. This kiln is practically new and never fired high.
I also have a L&L JD230, 208 volt, 3 phase, 7 cubic foot kiln. serial #052202B 25.4 amps with dyna trol computer for sale. This kiln is in fine condition and is a steal at $900. it must be installed where 208 volt 3 phase service is available, however it can be converted to 240 but would require a simple change in the input wiring and must have 240 elements installed.
Ocean City, MD
#318 - Jul. 25, '13
Model #HFQ-20, Serial # 731 - A.D. Alpine Front Loader Gas Kiln. Needs work on control panel. Bricks and silicon carbide shelves in good shape. Kiln used and located in Island Park, Idaho by the original owners of Island Park Pottery. Will consider giving brand new silicon carbide shelves in with deal! Buyer picks up! If interested you may send message via email.
Island Park, ID
#316 - Jun. 14, '13
Lightly used Jen Ken Kiln for glass fusion. Operates on regular house current of 120V uses 13 amps. Has Built-in Infinite Controller and Pyrometer. Measures 11 inches wide and 4.5 inches deep. Comes with shelf, 3-1/2 inch posts and instruction manual. Great starter kiln for home use. Purchased for $400.00. Asking $200.00.
#314 - May. 22, '13
Never been fired. Professional quality Olympic Torchbearer 2327G Kiln will reach cone 10 (2350°F). Currently set up for natural gas but will also run on propane by changing out nozzles. Easy to adjust for oxidation, reduction, or raku firing. The multiple burner configuration gives very even heating characteristics, fast controllable firing times, and economical operation.
Comes with Ignition Ring and Thermocouple Safety Valve that enables the multiple burners to be ignited from one point. This keeps the burners lit and shuts off gas flow if burners are not ignited.
Included Remote Analog Pyrometer enables accurate temperature monitoring during firing. Inside dimensions: 23 3/8" wide x 27" deep, fires to cone 10/2350°F. Comes with 3-Orifice Burner System, Electronic Ignition System with Thermocouple Safety Shut-off Valve, 120V Gas Kiln Sitter System (w/o Timer), Analog Pyrometer and Electronic Disconnect, and 4-foot Flexible Gas Line.
Model 2327G Gas/Propane LP/NG?Inside Dimensions 23-3/8" x 27", 7-CF. BTU Burner x 1000~ 80, 240,000 BTU Hr Total 3 Burners, 3/4" Gas Pipe
$1400. You Pick Up
Basking Ridge, NJ
#313 - May. 21, '13
Skutt 231. Serial #11997
Single phase electric kiln. Fires to cone 8. Great condition. Works great. Included area shelves and stands and a gallon container of kiln wash. $700.00.
#309 - Apr. 23, '13
2-Knight 16.5 c.t. Oval with Model LT-3K Kiln Sitters, some Brick & Element work needed.
Also Cress Model B-18-H. Pics available! All for $2250.00 OBO -Russ
Santa Monica, CA
#308 - Apr. 16, '13
A 240 volt, single phase, 10 cubic foot Skutt KM1227 kiln with easy lift lid and kiln master controller, this kiln is 4 years old and only low fired a few times. Price is firm at $1600, shelves and posts included.
I also have a L&L JD230, 208 volt, 3 phase, 7 cubic foot kiln. serial #052202B 25.4 amps with dyna trol computer for sale. This kiln is is fine condition and is a steal at $900. it must be installed where 208 volt 3 phase service is available, however it can be converted to 240 but would require a simple change in the input wiring and must have 240 elements installed.
Ocean City, MD
#306 - Mar. 14, '13
Alaskan Potter needs to reduce firebrick collection to a manageable size. I have hard brick and soft brick, new and used. Please email me if you are contemplating a project building a new kiln. You can check out my website too if you like at glacierpottery.com
#305 - Mar. 5, '13
Scutt Model LT-3R Opening is 27in across and 24in deep. NEVER USED
240 volts, 50 amp Stored in waterproof t ent. You haul away.
San Francisco Bay Area, East Bay, near Oakland and Berkeley.
nancyom11 (at) comcast (dot) net
#304 - Mar. 3, '13
Model Lt 3K
Aim HIgh Fire with Kiln Sitter
7 sides 13.5 deep
120 volt/ 19 amp
#298 - Jan. 10, '13
We are selling 2 Kilns via an online auction in San Diego, CA on January 3rd.
TYB Unique Gift Manufacturer / Design Facility
Inspection Wednesday January 2nd 2012 from 9am noon
Auction Ends - Thursday January 3rd 2012 10:37AM
Location 1619 S Rancho Santa Fe Rd, Suite D, San Marcos, CA 92078
Items: Ceramic Kilns, Heat Preses, Office Equipment and Furniture, Shipping Supplies, Racking, Commercial Laser Printers, Computers, Sewing Machine, Large Worktables, AND MUCH MORE
Bidding to be offered via www.calauctions.com. Full payment due at end of auction.
San Marcos, CA
#296 - Dec. 30, '12
Skutt Automatic Kiln KM-1627PK
208 Volts AC 3W
3Phase 79 Amps
Max Temp 2350 F
jscott (at) ewu (dot) edu
#295 - Dec. 27, '12
Austin, TX area
#294 - Dec. 19, '12
Gare Kiln model 1818, stainless exterior, approximately 18x18 inside, with furniture, sitter, stand and boxes of Orton 018 cones, 240 volt, single phase, 24 amps.
Used three times like new - have pictures
#289 - Oct. 8, '12
For sale, Skutt Electric Kiln
240 volt, 29" x 33" with stand
2200 degrees , good shape
Pick up only
Bowling Green, KY
#287 - Sep. 23, '12
Brand New/Never Used!
Paragon SC2 Digital Kiln
Viewport & Bead Door
Turquoise Funiture Kit
Asking price $700.00 + free shipping!
I purchased this kiln from Cooltools website on 6/18/2012 but they only give store credit refunds. It has not been used. It is a great deal for one who would like to make jewelery! Please contact me at the below email if you have further questions. Thanks.
#286 - Sep. 23, '12
Santa Barbara, Ca. Potters
Looking for used gas kiln up to about 16 cubic feet for cone 10 reduction firing.
Prefer good, working condition, front loading.
Willing to transport within Southern CA.
Santa Barbara, CA
melody133 (at) cox (dot) net
#211 - Jun. 11, '16
Downdraft kiln, with working space approximately 40 x 36 x 40 like that of a Geil or Bailey.
#210 - Apr. 21, '16
Looking for Front Loading Electric Kiln
6 to 9 cubic feet
Would be willing to look at a kiln that needs some work.
Would drive 4-5 hours for the right kiln at the right price.
wschoelles (at) gainesville (dot) k12 (dot) mo (dot) us
#209 - Apr. 14, '16
I am looking for a large used oval kiln that is electrically past its prime, but is structurally sound. I don't mind if the elements are gone or controls are fried.
Virginia or surrounding states preferred.
#208 - Nov. 1, '15
Hi, I am looking for a used or brand new paragon kiln home artist 120 home artist. Please contact me by email. Thank you.
#207 - May. 18, '15
my name is Brian Deas and will like to know if you sell Electric Kilns? if yes then kindly get back to me with the prices you have. Hope to hear from you soon.
#206 - May. 6, '15
Wanted Looking for a 120v electric kiln to plug into household outlet. Not picky as to name of kiln just wanting a working one. For a bullied student that won't return to class out of fear. Can't afford a lot of $$$$
Opt North Atlanta, GA
#204 - Feb. 18, '15
looking for a 120v electric kiln to plug into a household outlet, preferably a 11"x9" or similar to fire to cone 6 or higher. In good working condition. electronic panel preferred but will also consider cone sitter. Will take any kiln furniture with it, cones, and a stand if it has one. Can pick up if within close distance to New Jersey, shipping preferred. Call, text or email to discuss pricing and other logistics.
#203 - Feb. 9, '15
Looking for small table top kiln in or near Atlanta, GA.
I'm a hobbyist and just starting out. I am looking for a small table top kiln or any kiln that can be plugged into a standard outlet. I would like it to be, inexpensive and in good working condition, no repairs needed. Looking to fire small objects and tiles possible. Would consider buying any leftover accessories or glazes as well, if reasonable.
#202 - Jan. 24, '15
Looking for a fusing/slumping kiln that is big enough to slump wine bottles and vases but using 120v line.
#200 - Oct. 24, '14
Wanted: Small Digitally controlled kiln for PMC & Enameling Glass work.
1800 degree minimum.
I would prefer digital.
Good working condition only - please send pics
Hampton Roads area, VA
#199 - Aug. 21, '14
William Wirt, a Title I middle school near College Park, Maryland is seeking a working Kiln for its Art Department next year. Funding for the Art's Program is being reduced and cannot afford a new one, The current Kiln was damaged in flooding.
If anyone in the area can please help out via donation or dramatically reduced pricing, please contact us.
College Park, MD
#196 - Jun. 8, '14
Looking for an electric kiln to bisque fire work in. Ideally a large oval kiln, but anything between 5 cubic feet and 16 cubic feet would be useful. Only requirement is a computer controlled system.
Bay Area, CA
sarah (dot) kersten (at) gmail (dot) com
#195 - May. 27, '14
Wanted: Small Digitally controlled kiln for PMC & Glass work. 1800 degree minimum.
Aim or Paragon preferred. Must be digital.
Bay Area, CA
#194 - May. 4, '14
Test kiln wanted in NW.
#193 - Apr. 7, '14
I am looking for an used electronic kiln. I either want a Skutt Model KM818 or Skutt KM1018. I will consider another popular brand (or size). I don't want to have to do any repair on it. I also need some furniture.
I live in the southwest corner of Colorado and will travel a reasonable distance. I am ready to buy!
#192 - Mar. 2, '14
need to raku a 2 ft around sign
need a kiln large enough
#191 - Feb. 6, '14
Kiln Wanted. Top loading 4 cu. ft. 240v single phase kiln sought in south east.
#190 - Jan. 29, '14
Looking to buy Duncan kiln collar KC405 for "the studio" kiln
North Haven, CT
#189 - Jan. 20, '14
Looking for reasonably priced used gas kiln approx. 20 cu. feet firing space. A Berman, Halverson or Geil kiln are my first choices, or a kiln built with K-23's or? Location within U.S. not that important. A finders fee if you bring me the right contact.
#188 - Jul. 6, '13
Looking for used or new reasonable priced kiln. Top loading or front loading. Have 6 inch deep kiln. Want something bigger and deeper. Preferably 18 inch wide or more and 16 or more deep.
Bay Area, CA
#187 - Jun. 24, '13
Looking for a large "super raku" kiln around 30" inside diameter that can be used with Propane.
Los Angeles, CA
#185 - Apr. 5, '13
I have an old Skutt Model 145 that I am donating to a kids' art studio. I don't have the operating manual for it, and apparently neither does Skutt. If someone has and could pdf and email to me, I would be happy to pay a reasonable amount for their time.
#184 - Jan. 18, '13
7 Cubic foot electric kiln in good condition. 220-240 volt, must fire to cone 10. Will travel some distance.
Hudson Valley, NY
#182 - Jan. 11, '13
Looking for a used medium size front load kiln between 6-12 cubic feet. Will move. Have shelves. Must be functional. Looks unimportant. NO 3 phase please, cant use it. :(
#181 - Dec. 7, '12
I recently moved from Brooklyn to Los Angeles and had to sell my electric oval kiln.
I am now in need of purchasing another oval or bigger kiln in the California area.
Interested sellers please email me.
#179 - Oct. 18, '12
electric kiln, Skutt KM 1227-3 or equivalent, 28" diam. chamber, 9.9 cu. ft. single phase 240 V,new or in good condition.
#180 - Oct. 18, '12
I am looking for a large oval or rectangular top-loading Electric kiln. Interior dimensions should be in the range of 35"L x 48"W x45"H. It needs to be at least cone 6, preferably cone 10; 240V; I am willing to drive a reasonable distance for the right kiln. Would prefer a kiln that has layers that can be removed without too much hassle for the firing of large/heavy pieces. I will consider kilns with similar specs, but length dimension must be longer than 35".
#177 - Aug. 20, '12
Seeking "mini" kiln that uses standard electrical outlet for firing smaller
#176 - Aug. 14, '12
Northern California based ceramics company is looking for a 12' - 14'
long gas kiln. Will retrieve kiln.
#175 - Aug. 9, '12
I would like to purchase a ceramic kiln that can fire up to cone 6 but, would prefer one that can do cone 10. Also, dimensions 18x22, and 3inch brick. Please email me about any kilns, I will consider all similar ones, and willing to pick up at a reasonable distance.
#174 - Aug. 3, '12
Wanted: used electric kiln, Skutt 1227 or equivalent,
28" diam. chamber, 9.9 cu. ft. single phase 240 V,
in good condition.
#172 - Jul. 22, '12
Wanted slightly used or new small front loading Olympic cone 6 kiln Model 1214FL or 1414FL with or without Guillotine door. Must operates on 240 or 208 volts, 1 phase with electronic controller. Please state all pertinent information.
Upstate New York
#171 - Jul. 16, '12
I am looking for a fair and reasonably priced used GLASS firing kiln for fusing and slumping that is at least 15 inches wide. I live in Pennsylvania and would be willing to drive to pick the kiln up in NY, Ohio, NJ, MD, DE, VA, WV or any distance within 6 hours.
#170 - Jul. 11, '12
Looking for a Residential Kiln, up to cone 10.
Would ideally like a payment plan if the kiln
is more then 600, but willing to talk it out.
Warranty is optional, but it MUST WORK.
#168 - Jul. 5, '12
KILN parts wanted. I have a PASCO Electric Kiln, model P-6. I have all the parts EXCEPT the two "peephole plugs." I am trying to find a pair. I'm in Iowa.
#167 - Jun. 29, '12
Wanted Small-Medium Used Bead Annealing Kiln. Would prefer an electronic controler. Bead Kiln Wanted maybe Chili-Pepper? I will pick-up or pay shipping.
#164 - Jun. 17, '12
I am looking for a Raku kiln for natural gas. Prefer it to be made from fiber. I live in Tennessee near Knoxville please email me at Jason.m.fox(at)gmail(dot)com
Tennessee near Knoxville
#162 - Jun. 12, '12
Need a replacement elect kiln... Good condition, 240 volts, New York area can pick up...
New York area
#160 - Jun. 6, '12
I am looking for a Skutt GM 1014 or similiar.
holds approx 20x20 shelf (but will consider slightly smaller or larger),
prefer interior depth of about 8-12",
no vent necessary,
furniture a PLUS.
On tight budget BUT I can pick-up EITHER IN:
100 mile radius of Baltimore
100 mile radius of Chicago.
holden holdenbecker com
#159 - May. 31, '12
Looking for a kiln, electric, Med. size. I am in Washington State, the Southeastern corner. I would like to find something within a distance I can drive to get. The price would depend on the kiln and what comes with it, furniture, cones... juliannekennon(at) yahoo(dot)com
#157 - May. 25, '12
Looking for a kiln, electric, Med. size. I am in Washington State, the Southeastern corner. I would like to find something within a distance I can drive to get. The price would depend on the kiln and what comes with it, furniture, cones... juliannekennon(at) yahoo(dot)com
#156 - May. 20, '12
Small Ceramic Kiln Wanted.
New York City
Contact Dani at daniratart(at)yahoo(dot)com
New York City
#155 - May. 14, '12
Wanted small high fire kiln for use as a glass color warming oven. Contact me by phone 508-269-2300 or email. I am in New England area but I will pay shipping.
#154 - May. 8, '12
Wanted a Skutt kiln GM1414 or other brand of same size. Live in Central, Texas. Please contact Karen Karlik
#153 - May. 2, '12
Want-to-buy a used electric kiln at a reasonable, preferably very inexpensive price 240 v good working condition. Shelving kit, vent kit and stand not necessary, but a plus. I am looking for a kiln to fire small to medium sized bowls, etc. at my home; for personal / hobby use only. Looking for local pick-up.
northern panhandle of west virginia
#152 - Apr. 26, '12
looking for a kiln that can anneal borosilicate glass. on a tight budget so something $300 or under.
#150 - Apr. 21, '12