Classifieds: Equipment Wanted and For Sale

Pottery supplies for sale, Great Neck, Long Island. Cash only, no checks please.

Used Econo Kiln J-18-X (make an offer, it's 20 yr old), Orton pyrometric firing cones, glaze-making chemicals, colorants (oxides, etc.), bisque-ware, egyptian paste, etc.

Glaze-making chemicals: Chromium oxide, copper carb, tin ox, iron ox, neph sy, frits, whiting, lots more. All powders in good dry condition, used bags that have been opened, about 1/2 lb more or less in each. Make an offer. The lot of chemicals is worth about $100. Also lots of dried-up Duncan underglaze colorants etc.

Will consider selling some of my 30-yr old aged clay, mostly mid-range stoneware and earthenware. Some is still wet, some is dry.

Great Neck, Long Island, NY
kattkandu ( at ) gmail ( dot ) com

#319 - Feb. 9, '20

I am upgrading to a 30ton studio RAM press so selling two used presses.

1. modified H-frame press that was used at RISD (before they purchased an actual RAM press). This press uses an Enerpac RC-256 cylinder and air over hydraulic pump. Includes five die sets/cases (12" diameter). This press is good for tile or shallow items. Registration is done by hand and secured with clamps. I can supply more information and specifics/photos if you are seriously interested. This would be a great setup for a school or someone looking to create tile or simply begin pressing/learning about the process at a substantial discount.
The Enerpac cylinder has been rebuilt with new seals. Some airhoses, foot pedal and fittings included but buyer will need to supply own air compressor.

standing height 84"

photo on Instagram

$1600

2. tabletop RAM press (no dies included)

A great tool for making jewelry, ornaments or small parts.

PDF fact sheet

$1400

Please help me open up some space in my studio for 2020

Kensington/Philadelphia, PA 19134
shopcone10 ( at ) gmail ( dot ) com

#318 - Feb. 8, '20

Two sets of RAM press rings / molds available for free for anyone who will pick up. Both are 17.5" in diameter.

Also have approximately 20 slip cast molds for large vase, small vase, mug, and small cup. These are also available for free to anyone who will pick up.

(Photos available upon request)

Venice, Los Angeles, CA
miaherron ( at ) gmail ( dot ) com

#317 - Nov. 20, '19

Portable Slip Tanks

25 gallon portable slip tank & 100 gallon portable slip tank.

Please call or email for additional information.

Red Wing, MN
651-380-0797
irenej ( at ) redwingstoneware ( dot ) com

#316 - Nov. 5, '19

Pug Mills

Vanhoe 5 hp pugmill and Vanoe 3 hp Pugmill available.

Please call or email for additional information.

Red Wing, MN
651-380-0797
irenej ( at ) redwingstoneware ( dot ) com

#315 - Nov. 5, '19

Presses

1 Ram 30 Ton, 2 Wieland 10 Ton & 1 Wieland 8 Ton. Many rings, die lift and die stand are also available.

Please call or email for additional information.

Red Wing, MN
651-380-0797
irenej ( at ) redwingstoneware ( dot ) com

#314 - Nov. 5, '19

Tile Nozzle and Extrusion Die set. Both stainless steel. Custom Made by WCS Clay machinery to fit a Van Ho Pugmill. This has never been used. The Die will produce a 9-1/2" wide by 5/16" tile ribbon. Asking $350.00 and includes shipping anywhere in U.S. Call Jason. I can send pics if needed

503-880-2360
shadesmalloy ( at ) hotmail ( dot ) com

#313 - Oct. 9, '19

Soldner Clay Mixer - older but still in working condition. $2000.00 OBO. Local pickup only.

Garden Valley, Idaho
gail ( at ) gailwhite ( dot ) com

#311 - Aug. 27, '19

Selection of Pottery equipment for sale:

Brent 36 Slab Roller, a large slab roller designed for potters creating large products.Features a wagon wheel handle and comes with steel pipe legs. Slab size is 36" wide by 52" long , 1/8" to 1 1/4" thick. Great condition. New costs more than $3,000.
Kiln insulating thermal bricks:
35 boxes of JM-23 soft bricks, 2-1/2" straight. 25 per box.
5 boxes of JM-26 hard bricks, 2-1/2" straight. 25 per box
1 box of 26-R arched pieces

Other kiln parts including nozzles, switches, valves
Kick wheel.

$1,995 for everything or make an offer.

Naples, Maine (Near Portland)
207-210-7421
diane ( dot ) geiser ( at ) lakeregionschools ( dot ) org

#310 - Jul. 14, '19

Good condition slab roller. Rolls slabs up to 36" wide x 5' long. Comes with all boards. Table dimensions 77"L x 42"W x 36" T (not including wheel/roller) Retail $3000, asking $1000.

Pics here

Los Angeles, CA
damienart ( at ) gmail ( dot ) com

#308 - May. 22, '19

Ceramic Decal Printer - $3000

The printer is a Ricoh Afficio SPC43DN. I bought it in 2013 but have not used it that much. The toners are about 3/4 full and still viable. I originally paid $5750 from Enduring Images in Denver. Ricoh is not making that specific printer any more but I have the installation CD and other supporting material. I also have about 900 - 11x 17 decal transfer sheets, 45 - 11 x17 cover coat sheets, a Aikles pro lam 230 to attach cover coat sheets to transfer sheets, an energy star dehumidifier and a Swingline smart cut paper cutter. All the add ons new would be an additional value of approx $800 for a total of $6550 if you bought all this new. Asking $3000 for the package. I have tested everything and all is in working order. Dimensions: 26" L X 17" W X 19" H.

Please call, text, or email Candace.

near Basalt, CO 81621
970-948-8672
candaceresnick at hotmail dot com

#307 - May. 17, '19

Bailey A-400 pug mill with vacuum pump and rolling cart.
FOB Panora Iowa 50216
$1,050.00
For a complete list of materials and equipment for sale, or photos, contact by email

Panora, Iowa
redlotusceramics ( at ) yahoo ( dot ) com

#306 - May. 12, '19

For sale - $2000 Peter Pugger PM100 variable speed, foot pedal control. Less than 1000 hours use.

Nashville, TN
HAPPIGRL69 ( at ) YAHOO ( dot ) COM

#304 - Apr. 28, '19

Curtis Compressor
5E2VT8-2 2 stage, 1 phase, 5hp 240v Baldor motor CT series 80 gal tank auto drain

Asking $1000 FOB Denver CO will entertain offers. This is a fabulous workhorse and powered my RAM press for many years and air to an entire large contract production studio. All paperwork included.

Jonatha Kaplan
cell: 303-909-5488

Plinth Gallery, Denver, CO 80216
303-295-0717
jonathan ( at ) plinthgallery ( dot ) com

#302 - Apr. 1, '19

Olympic DD20 gas kiln, high fire reduction downdraft in excellent condition, with shelves and posts and hood for indoor or outdoor installation. 2100 lb.
$5000.00

Lehman 30B slip mixer with motor, excellent condition
$250.00

Lehman T-100 casting table with centrifugal pump -NEVER USED
111" L x 20" W x 29" H. 75 lb
$600.00

You pick-up only, no shipping

Contact Steven Lapin

Fairfax, VA
571-334-1900
lapinart1 ( at ) gmail ( dot ) com

#301 - Mar. 21, '19

FOR SALE:

- Lehman Model GS20; 25 gallon; on casters, good condition asking $400

Email me for photos. All in working condition. Selling due to downsizing.

Email me for texting number.

Greenville, SC
Katrina (at) bvideo (dot) com

#299 - Jan. 23, '19

FOR SALE - 30-TON STUDIO PRESS - PETER PUGGER - NEVER BEEN USED
I am looking to sell my brand new plate press which has never been used.
Either take over payments (I have paid on lease for over 12 months) or purchase outright for amount due on current lease.
Must be able to remove and transport independently. Contact via email.

South San Francisco
mary ( at ) honestlygoods ( dot ) com

#300 - Jan. 3, '19

Selling rubber drive bushing for Randall motorized potters wheels. These are no longer made and therefore great to have a spare one. These have a 1/2 ID opening for a motor with the corresponding size. They are $50 each.

AMACO cast aluminium motor mount to convert non-motorized flywheel potter's wheels to be motorized. This was made for their model, but could be refitted to work with other models, too. I only have one. $85.00.

Ohaus model 1119 40 lb, 20 kg capacity solution triple beam balance with tare weight and 3 auxiliary weights. This is a heavy duty scale used for making large glaze batches or small test clay body samples. $275.00

For DIY, Machined shaft with collar to mount flywheel and wheel head. Overall length is 25". Shaft diameter is 1" with the upper 2-3/4" machined down to 1/2" to accept corresponding wheel head. 1-1/2" inches from the bottom of the shaft a machined collar is set onto the shaft. The collar has appropriately drilled holes to hold a steel or aluminum flywheel. I have (2) each $55.

Cast Aluminum wheel head 12" diameter with 5/8" diameter hole for shaft. Doesn't have a drilled and tapped hole for a set screw. $59.00

Cast Aluminum plaster/ wooden bat recessed wheel head. 9-3/4" diameter with a 1/2" lip. Has a 5/8" hole for shaft and a drilled and tapped hole with the set screw included. $52.50.

You are welcome to call/text me, but please no later than 8 pm EST. Or email me.
All items are fob Columbus, Ohio.

Columbus, Ohio
614-477-9930
neriage48 ( at ) gmail ( dot ) com

#296 - Sep. 23, '18

3 wheels for sale 1.Shimpo RK-2 2. Amaco wheel 3.Pacifica Glyde Torc/EACH $450 or $1250 for all 3. BlueBird 440 pugmill w/ speedaire vacuum pump $1250/ BB clay mixer model 12 $1250/ Skutt KM1227 no elements, needs rewiring $1100

Watertown, MA
cmcrmxs ( at ) gmail ( dot ) com

#295 - Sep. 13, '18

New ring for L&L kiln. Jd2936-3. NEW cost is $1100.00 Will sell for $500.00
Potters Brown
www.pottersbrown.com

Edom, Texas 75754
903-852-6473
pottersbrown1 ( at ) earthlink ( dot ) net

#293 - Jul. 16, '18

30 Ton RAM Press for sale. Includes 20 various sizes of working dies. Asking $9,500. Contact Debi

Indio, CA
503-803-7221
debmurph1 (at) gmail (dot) com

#292 - Jul. 16, '18

1) 20 Sio2 kiln shelves 12x24 $400.00
2) 4 Sio2 kiln shelves 18x18 $40.00
3) 25 Sio2 kiln shelves 9"x14" $250.00
4) 15 mullite kiln shelves
5) 2 pallets firebrick 3" series
6) Oxi probe $ 500.00
7) digital pyrometer $ 60.00
8) analog pyrometer
9) rails for carkiln
10) 2 gas burners with blowers and thermostat couples $100.00
11) Talisman glaze sieve with 4 of screens of different sizes $200.00
12) large size Brent wheel old cxc rebuilt new electronics and whee head $500.00
13) treadle wheel,$200
15) slab roller
16) extruder
17) 4 ware carts with shelves fit a 36" door with most wearboards $800.00
18) 40 plastic bats $160.00
19) many glaze chemicals
20) electric skutt kiln with vent
21) raku kiln
22) Ballmill 30 gallons $200.00
23) Roller mill for crushing rocks before ball milling needs motor, works with rocks up to egg size
24) 10 14" plastic bats $80.00
28) art fair tent $300
31) Ohaus 700 triple beam scale with weights $50.00
32) hydrometer
33) artisan st-4 stool - throwing stool $50.00
34) Filter press, Blunger, Stainless steel settling tank, 50 gal ball mill, deairing pugmill, $7000.00

every thing is located in Buhl Idaho and except for some small things, must be picked up there, postage will be charged
Drop me a line and we will talk prices on other equipment
Larry Davidson

Buhl Idaho
ladavidson10 ( at ) gmail ( dot ) com

#291 - Jun. 17, '18

Pug Mill Venco Marc II with Air Removal Pump - $2000

Huge heavy duty clay workers pug mill on wheels for convenient moving about. Has air removing pump too.

Will deliver within 3 hours or meet half way. Cash only no checks.

Pottstown PA, 19464
484-686-6151
affordablecopperroofing ( at ) gmail ( dot ) com

#289 - Feb. 21, '18

Production calibre pottery equipment available:

15-ton RAM style press: includes numerous dies (all custom built to a high standard)

Jolly jigger wheel: flat wheel head, distinct vertical and horizontal template movement: good for deep or shallow parts

Electric kilns: two 16 cubic foot Cone Art kilns (4227D) with shelves and stilts (one like new, the other well used- priced accordingly)

Display fixtures: Two 8' x 10' booths can be furnished. Maple, under shelf lighting, storage below, (sales desks are very efficient). Pieces dismantle and fold for easy shipment and storage. Very beautifully made. Also suitable for full time retail use.

Seller may be able to assist with transportation. Any reasonable offer is welcome.

Nova Scotia
902-275-3235
christie( dot )chaplin( dot )saunders( at )gmail( dot )com

#284 - Jan. 30, '18

Brand new Peter Pugger for sale, VPM-7, described by Peter Pugger as:

Stainless Steel: Shaft, augers and paddles of stainless steel, along with aluminum mixing/pugging chamber ensures rust-free clay processing.
Large Hopper: The oversized hopper door allows for easy loading of up to 14 lbs. of clay per batch.
Batch Mixing Capability: Full batch mixing and blending capability allows for moisture adjustment before pugging.
Pugmill Output: Switch to PUG after a batch is completely mixed, and the Power Wedger unloads itself in the form of 3" diameter deaired logs.
Vacuum Deaired: Each batch can be deaired by starting the vacuum pump during the last stage of mixing, leaving an air-free product when pugged out (no need to run the clay through the pugmill multiple times). Once the entire batch of clay has been deaired, switch the pugmill to PUG, and press start. Any remaining deaired clay in the machine can be stored for later use without having to remix or deair. Our patented vacuum design allows us to deair the entire batch of clay without the use of cumbersome vacuum/shredding screens, or down time due to a clogged pugmill! No other mixing pugmill on the market matches the Peter Pugger's effectiveness at deairing clay. We guarantee it!

Never used. Retails $3390, selling for $3000 with table.

Ann Arbor, MI
734-478-5447
jjbedore( at )comcast( dot )net

#283 - Jan. 20, '18

Heavy Duty Tabletop Slab Roller with Independent Gap Adjusters (no shims), $400.

This Slab Roller has an all steel frame and drive system with a moving work table surface of 25 inches long by 18 inches wide. It has independent gap adjusters covering a thickness range of 0 to over 1 inch, so no shims are required. Four complete turns on the adjusters produce about 1/4" thick slab of clay. Since the adjusters are independent you have the ability to make wedge shape slabs, if you like. This feature also makes it possible to emboss the clay surface right on the machine. This is a table top model it is portable (overall dimensions 32"L X 24"W X 5.5"H not including the handle, and weighs about 35 lbs). It fits on a table as small as a 24" X 20" and can be easily stored on its side maximizing studio space.

Following is a link to a YouTube video showing it in operation (NOTE: The gap adjusters are knobs, not handles). https://www.youtube.com/watch?v=rPEAvTH5ICo&feature=youtu.be

I designed and built this for my wife who is a potter. The design we settled on is based on her experience with typical art studio slab rollers and my manufacturing engineering background.

Will ship to US location (not including Alaska, Hawaii or Puerto Rico) for $50.

Contact Sallie.

Cape Coral, FL
sallieheart( at )gmail( dot )com

#281 - Nov. 16, '17

Free scrap clay, about 800 lbs, high fire porcelain

Western NC
bvt_14( at )msn( dot )com

#278 - Oct. 10, '17

RAM press for sale.
2.5 Ton XL Table top studio press with cart and foot pedal system. All particulars here: http://ramprocess.com/TableTop/Table%20Top%20091507.pdf
Asking $2200 USD
Email for more info
Happy to help to arrange shipping

Vancouver Island, BC
artful( dot )blog( at )gmail( dot )com

#272 - Jul. 26, '17

Shimpo Pugmil PM-071V Pugmil; Hardly used in great condition

New- $2167 will sell for $1500

+ Heavy-Duty Aluminum Body / Extremely durable design for both school and professional applications; die-cast body resists corrosion, preventing clay body contamination

+ Unique Flexible Design / Enables one to upgrade equipment as needs grow

+ Powerful 1 HP Motor / Blends and extrudes clay at 800 lbs/hour

+ Special Triple Safety System / Ignition key prevents unauthorized use; limit switch stops auger when exposed; prominent emergency stop button

+ Stainless Steel Auger / Non-corrosive surface easily moves clay through barrel

+ Retractable Clay Rest / Convenient for bagging clay; slides under pug mill to save space when not needed

+ Easy Disassembly Bolt System / Designed for easy removal of barrel top, allowing for thorough cleaning of interior

Must pick up.

Lower Manhattan, New York City
susan( at )manhattanyouth( dot )org

#268 - Jun. 18, '17

FOR SALE:
PUG MILL CLAY RECYCLER - INDURIAL STRENGTH

PRICE $3,500.00

Industrial Pug Mill, well built, and is made of Solid Cast Iron.
It extrudes two inch diameter tubes of recycled clay after it goes through the auger.
Made by Normand Electrical Company, Ltd., of London and Portsmouth.
Gap Start; 1725/16 RPM; Torque = 100 Lbs.

This pug mill works very well, and is a real "work horse"! It will be around for a very long time! I'm the second owner.

Pictures available upon request.
You pay shipping costs.

Contact: TJ

Western Massachusetts
443-691-3089
Movingon2MA (at) gmail (dot) com

#267 - Apr. 24, '17

For Sale, From Bennington College
This is one tough work horse for anyone slip mixing and casting
Slip mixing blunger- by Lightnin Mixer Model EV6P75
¾ HP, 1725 RPM, single phase
This is a brand new mixer which has never been used
It comes with a 58 inch shaft and two 10.5 impellers
If you want pictures send me your email
Price is $ 3,000,
Buyer pay's for the shipping
Please contact Barry

Bennington, VT
518-821-5050
bbartlett (at) bennington (dot) edu

#261 - Feb. 28, '17

High fire extension for a 25.5" (outer dimension) Paragon kiln. The extension adds .94 cu. ft. to a kiln and needs a kiln with a receptacle on the front switch box where it can be plugged in.

This was recently given to me by a man whose mother was a potter. My kiln doesn't have the necessary receptacle for the plug. Too bad - I'd love to be able to extend my firing space!

Very good condition - bricks are perfect. Even though it’s discontinued, Paragon told me it still makes parts for it. New these were $600.

Measurements:
25.5" outer diameter
10" deep

$175 obo.

Local pickup - or shipping is an option. Shipping weight is 130.00 Lbs./58.97 Kg.

Sebring, FL
earthmama( dot )eh( at )gmail( dot )com

#259 - Jan. 22, '17

For sale! Package deal!!

#1 - Manual Extruder with some plates (not sure how many); reinforced with 4x4.
#2 - Screens and clay boards: 1 fine screen (22x22) + 1 coarse screen (22x22);
two medium clay dressing boards (22x34);
two large canvas-covered clay wedging boards (36x48)
#5 - Two large rolling pins

$350 takes all!

Please call M. Easterwood

Birmingham, AL
512-202-6468
mystes13(at)gmail(dot)com

#258 - Jan. 11, '17

I am selling the following equipment:
25) 12"x24"x5/8" silica carbide shelves good condition, just slightly warped $50 each

6) ware racks at $200 each

variety of plastic-bats

many glaze minerals

buyer responsible for transporting equipment

call if interested or e-mail me.

Pasadena, CA
626-755-4525
woodward( at )caltech( dot )edu

#257 - Jan. 3, '17